Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Belt size excluding A/C compressor? 700 1987

posted by  nh on  Mon Mar 14 12:06 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

My A/C compressor sounds like it has a bad bearing and I thought I would just remove it for now until I can find a good replacement. I won't be needing A/C for a few months anyway -- and here in New Hampshire it's generally useful only between noon and 3 on August 12 ;-)

The question is, how do I get the right size belt to use while the compressor is gone? Currently the belt drives the water pump as well, of course.

If I just measure the diameter of the pulleys on the engine and the water pump and the distance center-to-center is that enough to find the right size at NAPA or wherever? I've only ever purchased belts by standard application; are they available by length too?

Thanks!
--
855, 765t, new acquisition! 244






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Belt size excluding A/C compressor? [700][1987]
posted by  nh  on Mon Mar 14 12:06 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.