Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2011 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rebuilding Girling Calipers myself...grease or brake fluid for lube?? 700 1986

posted by  raidman on  Wed Mar 16 15:27 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

have just received a pair of rear ATE rebuilt calipers and am rebuilding a set of good used front Girling calipers (to replace the aging Bendix calipers now installed).
The rebuild Kit I bought had all 4 large o-rings, the rubber covers and an included packet of grease. I used this grease to lube the pistons and inserted them into the calipers with no problem.
should I have used just Dot4 brake fluid? Or is it OK to use the included grease? Ithink it is 100% silicon.
I'm waitng overnight for the yellow caliper paint (to contrast with the dark blue pAint of the 745) to dry, then it's on to finish the rebuilding.
If I screwed up (won't be the first time)...I still have time to take the pistons out and clean out the grease.
gracias,
el raidman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rebuilding Girling Calipers myself...grease or brake fluid for lube?? [700][1986]
posted by  raidman  on Wed Mar 16 15:27 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.