Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2014 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Nivomat installation 900 1992

posted by  jgh3rd on  Thu Mar 17 08:07 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 5 01:14 CST 2007
[RELATED]

Hello All,

I recently bought a '92 965 with 211K. I have all records since 20K. The PO states that the rear shocks were replaced around 150K. Before I bought it, I noticed that the rear end was pretty low (~1.5-2" above the tire). Read the FAQ, and figured that the nivomats had failed since it stayed low after driving it.

This AM, I took a look, and realized that the PO had put in standard shocks! I know about the nivomat conversion possibility. How can I tell if the springs were replaced (i.e. they did a conversion)? Is it possible that they are the stock springs and they just installed a regular shock instead of the nivos?

I went ahead and ordered new ones from FCP (I plan on towing a lightweight popup trailer). I have read the FAQ re: the install, but it is a little vague. For those of you who have done the install on a 965 with solid axle (not IRS), can you please provide some tips?

Thanks,

John Haddad






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Nivomat installation [900][1992]
posted by  jgh3rd  on Thu Mar 17 08:07 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.