Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Transmission Fluid Flush 200 1988

The automatic transmission fluid in my 1990 Wagon is very dirty. The fluid needs to be flushed & replaced. I purchased a rubber flush hose from IPD. The fitting on the upper right of the radiator is where the hose attaches for flush. However, the metal fitting is frozen tight. I am afraid if I torque it hard it will tear the line off and ruin the radiator. Any ideas how to accomplish a fluid flush safely? Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Transmission Fluid Flush [200][1988]
posted by  someone claiming to be John J  on Sun Mar 20 12:30 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.