Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Coolant temp sensor access 200 1984

posted by  cguin on  Tue Apr 12 05:05 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jul 24 10:57 CST 2010
[RELATED]

Hello Board,

Car is an '84 245ti. Yesterday my wife complained that upon startup the idle rpm went to ~2500 and stuck there.

When she started driving around town, idle returned to normal.

I searched the Board yesterday and one (seemingly easy to check) possibility seems to be that the connection at the coolant temp sensor needs to be cleaned and/or the sensor needs to be replaced.

So the two questions are:

1) Do I need to pull the intake manifold to access the sensor/connection?

2) Any adivce as to other likely causes for high idle rpm?

Thanks,
Corey






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Coolant temp sensor access [200][1984]
posted by  cguin  on Tue Apr 12 05:05 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.