Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help on bracket and oil 900

posted by  javajava on  Tue Apr 12 23:29 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I need to remove what appears to be a bracket/mount that helps mount the transmission to the engine. It is on the bottom, underneath the car. It is keeping me from looking at the oil pan and tightening the bolts for it. Will removing this tranmission mount bracket cause the tranni to move, or undue stress on other parts. Do i need to support the tranni? I just want to take it down long enough to tighten the pan bolts and have a look-see.


I have a lot of oil coming out between the engine and the transmission above this bracket. If it is not the pan, then it is the main seal.. The rear cam by the ditributor looks dry.



Thanks
Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help on bracket and oil [900]
posted by  javajava  on Tue Apr 12 23:29 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.