Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

metallic click from rear end when brakes first appied 200 1986

It occurs when I first apply the brakes, just as braking action begins. This noise has been troubling me for a while now. The noise is external to the cabin - I hear it more with the windows down. The major bushings have been replaced with polyurethane (rear trailing arm and torque rod) the others checked and appear to be in good shape. Also the shocks are less than a year old (KYB). Maybe I have a sticky caliper? However, I haven't noticed any trouble with the braking - no noticeable pull. In addition I often have a firm knock on take-off - the bushing replacements have firmed up the rear end but haven't eliminated this noise. I have not replaced any of the u-joints, but I've hand tested them with the driveshaft removed and there isn't noticeable slop. Anybody have similar experiences? Suggestions?
Thanks for your help,
Tom
'86 240 DL Wagon 238k miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New metallic click from rear end when brakes first appied [200][1986]
posted by  tvg  on Fri Apr 15 04:41 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.