Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

In Thor's name, why is this filler plug so tight? 900 1997

posted by  rafferd on  Sun Apr 17 16:04 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 11:10 CST 2014
[RELATED]

I filled the transmission of 93 and 97 960s with Mobil synthetic ATF last week.
(Slight improvement in shifting- I'll wait to see if there are MPG gains).
Wanting to complete the synthetic job, I planned to fill the diiferentials of both cars with Mobil 75-90.
The 97 960's transverse spring obscures the drain plug and the filler plug is hard to reach with all the suspension brackets in the way. I suppose I could pump it out.
The 93 looked easy, the drain plug was accessible and turned easily.
Not so the 13mm filler plug. It has marginally better access than the 97, but try as I might it would not budge!
I have sprayed it with PB Blaster and left it for next week.
Not the most productive of afternoons!

Dan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New In Thor's name, why is this filler plug so tight? [900][1997]
posted by  rafferd  on Sun Apr 17 16:04 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.