Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2019

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Nut Sizes for Oil Filter/Thermostat and Adapter Housing

posted by  Colin_D on  Tue Apr 19 09:12 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Does any body know thw precise size either in metric or sae, inches?
of the large filter adapter bolt? and the thermostat oil cooler fixing nut?

Faq says about 32mm for the bolt and a deep 29mm 0r 1-1/16 inf for the nut holding the thermostat? Is that in practice what works?

Only I don,t want to go a buy the wrong size for the job as the local store may not want to change them if used.

Any body whose done the job and used the right sized sockets may be able to help me?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Nut Sizes for Oil Filter/Thermostat and Adapter Housing
posted by  Colin_D  on Tue Apr 19 09:12 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.