Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2016 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing Gear Saga. 120-130

posted by  122_Canadian on  Tue May 10 03:54 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 20 07:51 CST 2009
[RELATED]

Just thought I'd let everyone know that I managed to get the hub off the crank and the remaider of the fibre gear off. I got a small puller for the cam gear hub and it came right off. The hub on the crank was more difficult. Not wanting to damage it, I put a piston ring compressor over it and clamped it down tight, attached a puller to that, but no joy. So I pulled out my trusty cold chisel and with a few TAPS of the hammer it came off as well. The crank gear was extracted with a $5 steering wheel puller.

Now I just have to wait for the new gears!

Thank for all the advice.
Craig







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.