Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Big tach install, ? on wiring 200 1986

uid 16215's pic
posted by  Thanos on  Thu May 12 13:03 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 20 02:30 CST 2010
[RELATED]

I got the big tach to replace the clock and and the small clock that installs to the right of the gauge cluster. The actual install of the tach was easy. But I have a question about the wiring. The tach has a 3 prong on top and 2 prong on bottom. Both male. I assumed the small clock plugs into the 3 prong, but what plugs into the 2 prong? A previous post i read that was somewhat related to this mention a red/white wire connected to the tach. I found the red/white wire, but it's a single connector.
any help would be greatly appreciated. thanks!

matt
--
--- '89 744 Turbo automatic, '89 745 Turbo manual






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Big tach install, ? on wiring [200][1986]
posted by  Thanos subscriber  on Thu May 12 13:03 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.