Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help with installing a Garrett turbo vacuum line 700

posted by  KellyMc on  Wed May 25 02:52 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 4 12:22 CST 2013
[RELATED]

I have a problem that the dealership hasn't been able to help me with. I am installing a salvaged engine from an '88 760 Turbo in to my '89 740 Turbo.

There is a vacuum line that connects the intake on the turbo to the wastegate actuator on the Garrett turbo on the new engine. The nipple at the intake side was loose so I tried to buy a new one from the dealer. When the new nipple arrived, it was brass and is threaded. The nipple on my turbo is plastic and has no threads nor is there any threading on the hole in the turbo itself. The dealership can't find anything like the nipple on my turbo in any of their books.

Has anyone worked with a Garrett turbo with this plastic type of nipple on the vacuum line? Is there somewhere I can buy a new piece?

How are these plastic nipples suppose to be attached to the turbo itself; are they pressed on or glued or what?

How can I make the plastic nipple I already have stay where it is suppose to?

Any help with this would be greatly appreciated.

Kelly






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help with installing a Garrett turbo vacuum line [700]
posted by  KellyMc  on Wed May 25 02:52 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.