Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B230F No intake valve stem seals!?! This is really strange. 200 1988

posted by  bosozoku on  Mon Jun 6 06:26 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 16 14:31 CST 2007
[RELATED]

I'm in the process of taking apart my B230F's head to replace the valve springs, and I noticed that the tops of the intake valve guides have no oil seals on them. Is this correct? The car has never burned excessive oil (less than 1/2 qt in 3000 miles) and seemss to have run just fine for 190k miles without them, but should it have seals there? Valve seals are sold in sets of 8, so I assume yes.

I haven't looked at the exhaust guides yet.


Thanks,
-b.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230F No intake valve stem seals!?! This is really strange. [200][1988]
posted by  bosozoku  on Mon Jun 6 06:26 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.