Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

how to clean head bolt threads in the head?82 244 200

posted by  someone claiming to be kris carlson on  Tue Jun 14 03:32 CST 2005 [RELATED]

i did not make it clear ...however what is the proper method to clean out the holes in the block before replacing the head?,which was warped ..the mechanic told the previous owner it was the fuel distributor..which i replaced along with a wiring harness...the car still ran very poorly...finally i suspected a burnt valve...but upon removing the head we noticed the gasket was burnt between #3 and #4 cylinders..the machine shop pointed out the warp ...resurfaced it along with a pressure check..now i am waiting for the gasket set from fcpgroton...hopefully this all comes to the happy ending we all love...kris






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New how to clean head bolt threads in the head?82 244 [200]
posted by  someone claiming to be kris carlson  on Tue Jun 14 03:32 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.