Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

valve cover engine threads stripped 900 1996

posted by  Robolerto on  Fri Jun 17 21:03 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Two weeks ago I bought a 960 with 168,000 miles and a small oil leak from the valve cover for $3100. I thought a gasket would fix it, but it turns out 8 of the valve cam hold down nuts would not retighten because the threads were stripped- there were rags placed under the plastic cover to soak up exess oil by some inventive mechanic. I could only get 8-10 foot pounds torque on all valve cover bolts without strippping them more. The leak is fixed now, but I'm worried about what will happen down the road. I'm thinking of taking the seller to small claims court for not disclosing that there were rags in the engine or just getting rid of the car before the nightmare gets worse. What are your thoughts?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New valve cover engine threads stripped [900][1996]
posted by  Robolerto  on Fri Jun 17 21:03 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.