Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Turbodiesel resurrection and FRAM PH977 Filter

posted by  1985_740_turbodiesel on  Fri Jun 24 14:27 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 21:44 CST 2014
[RELATED]

All I could find was the FRAM PH977A. Is this the correct filter? I did the valve clearances today. It went very well using the Hazet tool. A friend showed me how to pop the adjustment disks out with compressed air-very slick! He also happened to have 4 valve covers laying around collecting dust! The glow plugs in the car right now end in 021. The spec in the Bosch book says 032. I looked up 021 and it wasn't in the Bosch book. Can anyone explain this? is the 021 an old obsolete glowplug? Next step: compression. I'm kind of scared at what I might find...I guess a ring and valve job wouldn't be the end of the world.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbodiesel resurrection and FRAM PH977 Filter
posted by  1985_740_turbodiesel  on Fri Jun 24 14:27 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.