Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wheel Lug Bolt/Stud Rear What do I need to do to replace 200 1986

posted by  Dillon1 on  Sun Jun 26 16:26 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

My question is about the bolt part on which the rear wheel lug nuts instralled. These are the bolts that are holding the wheels onto the car.

Two of the rear lub bolts are stripped, and I take that to be a highly dangerous situation.

I'm thinking that I've got to approach it first like I'm replacing the rear brake pad, and take the calipers off.

But I want to ask what do I do next. My guess is to remove the brake rotor, (somehow) and then (somehow) extract the lug bolts.

Will the somehows be obvious once I get the calipers off and can see what the job is, or can I get some experienced advice on how to do this job.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wheel Lug Bolt/Stud Rear What do I need to do to replace [200][1986]
posted by  Dillon1  on Sun Jun 26 16:26 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.