Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

cleaning the EGR valve? 900

posted by  someone claiming to be augie on  Mon Jul 4 01:10 CST 2005 [RELATED]

I purchased a 95 940 turbo recently and I have a few questions concerning the EGR valve.
1) My Chilton's manual says the valve is only installed on the Ca. models, yet I have a valve above the starter and below the IAC valve, that has a stainless steel tube running from this valve to the top of the intake manifold. Is this an EGR valve?
2) Is there an easy way to clean this valve, and the ports? The 700/900 FAQ details instructions for taking the valve off the car to clean. I wondered if you can disconnect the pipe at the manifold, clean the ports, then spray throttle body cleaner down the tube to clean the valve. Sounds too easy to work. Any suggestions? Would this method damage the EGR valve? Do I have to clean any pipe or ports going to the exhaust?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New cleaning the EGR valve? [900]
posted by  someone claiming to be augie  on Mon Jul 4 01:10 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.