you know that aluminum ribbed tube that stretches from the air box to the heat shield? On the manifold side, is the heat shield opened to the hose? Earlier I posted how I got oil on the manifold and the heat shield and had to hose it down. I just realied that if the connection between the heat shield and pre-heater hose is open, then water must have drained down into the hose since I poured water on the heat shield (the inside where the manifold hides behind. Grrrrr, if that is the case then I will have to take out the hose and dry it or buy a new one since it's the original, I think. I'm not too thrilled about taking the belly pan off--actually it's putting it back on that is hard!