Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Looking for temperature vs. resistance values for LH 3.1 ECT sensor w/ black insulator 200 1991

posted by  danPA on  Sun Jul 10 11:07 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Bentley publishes a few temperature vs. resistance charts which seem to match with the blue-insulator ECT sensor (Bosch 0280130026) for the LH 2.4 system. Do these charts also work for the black-insulator ECT sensor (Bosch 0280130032)? Just looking for a chart or a few temperature vs. resistance values to check out an existing ECT sensor on an LH 3.1 system (3.1 system uses throttle position sensor instead of a switch). The only sensor value I've got so far is 3520 ohms at 87 deg. F which doesn't match the chart in Bentley. Thanks for any help. dan in PA






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Looking for temperature vs. resistance values for LH 3.1 ECT sensor w/ black insulator [200][1991]
posted by  danPA  on Sun Jul 10 11:07 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.