Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

car sat, brakes bad 200 1987

I let my 244 sit for a year or so. I had replaced all rotors and calipers with rebuilt, loaded units not long prior to that. Now the brakes pulse. The rotors seem to have some black spots on them - corrosion? On the front ones it appears more like a stripe running from edge to center. It doesn't really look like much but could that be the culprit?

I dialed them in and they look good in that respect. The pads have lots of wear left.

Should I replace the rotors with new and see if that does it? They are fairly new, could I have them turned? If I replace the rotors can I get away with using the old pads?

TIA

Joe






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New car sat, brakes bad [200][1987]
posted by  jhoover  on Wed Jul 13 07:12 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.