Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Having problems with lowering kit 200 1990

posted by  Natural244 on  Sat Jul 16 13:49 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 21 18:13 CST 2014
[RELATED]

Hi all,

Quick question, I just put new swaybars and Bilstein Touring strut inserts and rear shocks and B&G lowering springs on my '90 240 DL. I have all of this on the car now but am having problems with the front. When I put the new spring on and tightened down the strut bearings as far as they can go there is vertical play in the springs they don't seat against the bottom and top plates. This causes the spring to creak and groan when turning. I think there is some kind of spacer need here. Does anybody have any experience with this? Thanks - Tim






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Having problems with lowering kit [200][1990]
posted by  Natural244  on Sat Jul 16 13:49 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.