Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tach wiring 200 1981

posted by  MeidleinA on  Thu Aug 4 07:50 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I installed a small tach in a spare opening to the right of the main instrument cluster; however, I get no reading from it.

The backlight on it works and I know that the tach works too. I'm 100% sure that I wired it up correctly and connected the RED/WHITE that hangs down behind the dash.

I believe that the problem is that there is no connection between the RED/WHITE and #1 on the coil. Where does this R/W go? Does it go into the gray junction box on the other side of the firewall? I think I'm missing a wire somewhere....

Thanks,

Allan
--
81 DL Wagon - B21A - SU HIF6 - M46 w/ OD - 367,000 kilometres






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tach wiring [200][1981]
posted by  MeidleinA  on Thu Aug 4 07:50 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.