Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ICU Switch Test Failure 200

posted by  ben242 on  Wed Aug 24 07:00 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I think the thing that "rarely happens" is happening to me. My Ignition Control Unit seems to be failing. I only have about 8.9 volts going to the Terminal A of the Hall Sender from the ICU (I think I should have a full 12+ volts). I tried jumping Terminals B and C but did not get a spark.

So here is my question, will alternative ICU's from similar years work (mine is 1984)? I went to a local junk yard and found an 1985 ICU (#1346107) and an unknown year ICU (#1346105). Note: My 1984 ICU is #1317295. If someone knows if alternative ICU's will work PLEASE let me know! I am trying to avoid buying a new one when I'm not absolutely sure this is the problem. Thanks a lot.

Ben, 1984 242 (non-turbo)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ICU Switch Test Failure [200]
posted by  ben242  on Wed Aug 24 07:00 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.