The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Binding passenger window mechanism, Part 2 200 1985

posted by  someone claiming to be whooope on  Mon Oct 10 10:13 CST 2005 [RELATED]

Hi there,
Thanks to all who have brought me along this far. The door panel is removed; and I can now see that the back portion of the window (closest to the doorpost) pulls out the mechanism's channel. The window is okay until about half way up. At this point the window no longer raises evenly, the back portion continues up (pulling free of the channel) while the front portion stays put. It appears to bind near the place where the crank engages the larger toothed gear. I have tightened the four 10 mm bolts that hold the mechanism in place, and have WD 40'd every moving part I can reach. Suggestions please.
Thanks,
George

85 245 338k
82 244 73k






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.