The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Advice needed for pinpointing a rich running on 1988 volvo 740 with b230F engine.

posted by  Sammy29926 on  Thu Oct 20 12:25 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

hi fellow Brickboarders,
I own a 1988 volvo 740 gle with B230F. It has been running rich and today after purchasing a digital volt meter i decided to check my O2 sensor. I got a reading of 0.826-0.824 volts.. i decided to disconnect the idle valve hose from the intake tube (one with the largest diameter) and my car continue running/idling.. It used to stop when i do that. So my o2 sensor tellin ecu that car is running rich. i decided to check the ETC sensor but i couldn't locate the ecu terminals 13 and 5.. and there is no way i coul read any kind of voltage when the connector is connected to ecu.. Cloud you please tel me how to number the terminals and how to full the ecu conector to read the voltage at terminal 13.
Thank you and your help
Sammy29926






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.