The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

good amm doesn't seem to function 200

Hi Harvey,

If you want to verify the amm is conveying the airflow information, read the output voltage back to the ECU. It should run about 2.5-2.75V thereabouts when idling and up to 4-5V when revved up. With ignition on and no airflow it should be around 1.5-1.7V. I figure you have the book if you traced the wiring, so I won't fetch mine and read out pin numbers.

Other inputs to the ECU that govern injector duration are temp sensor (read at ECU- should be less than 0.2V when warmed up.), cold start enrichment (pin 4 I think looks at starter solenoid), and to a lesser extent the lambda sond.

Don't forget the stuff the computer can't control, like a stuck fuel pressure regulator or blocked return line. The tank and fuel delivery must have been a custom arrangement for your sawmill.

Regards and best of luck.
--
Art Benstein near Baltimore






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.