The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Overheating B-18 120-130 1966

There's a small hole in the thermostat plate with a loose piece of metal in it. That should be situated so it is towards the upper part of the engine (in the case of B18 that's the front) to allow the air below the thermostat up and insure that the thermostat gets submerged in liguid and functions properly. It's also a good idea to test the thermostat in hot and cold water to make sure it opens and closes. I put them on a wire so they don't touch the pot while heating on the stove.
Another problem could be an air lock within the closed system. Once the thermostat is functioning and positioned properly then all the air in the system will be in the top part among those hoses. What I did was install a bleeder into the top part of the highest hose so I could let the air out once the thermostat opens. Now I only have to relieve the pressure if I open the system for some reason...change fluid, thermostat or water pump.
Works pretty good. No more overheating.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.