The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine shudder after cold start S90-V90

The idle control valve is a canistor the is fixed on the air bonnet tube between the throttle body and the mass air meter, it sticks out from the air tube and one end goes into the air tube with the other end attached to the intake manifold.
You can see it just under the air tube about a foot from the throttle body.
Press on the wire connector clip and pull on the connector at the same time and the clip will slip off, take the icv loose from it's rubber housing,get some q tips and some throttle body spray from parts dealer, spray the carbon out of it and then spray the q tips and clean the rest of the rotary valve thats located on the inside. Shake the residue off, let dry and hook back up. Could very well be the problem your having is from all the vacuum leaks that you car has, get those hoses fixed up.
Hope that helps
Poolman






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.