The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A different No Cranky problem, partially resolved. Can it Be? 700

1990 740 GL Rex 212K

For some while (1-1/12 years), I have battled "No starting, and cranking" issues. Everytime, I get one resolved, I have another, of a different nature.

However, this time, I have time to do full diagnoses, and rebuild things. I am not a volvo mechanic, but by trade, a electro-mechanical technician.

Problem: While attempting to start engine, there is the fuel pump whine, Relay clicks, dash lights on, but no Cranky (cranking). In the past, I have replaced RSR, and even have two spares, Fuel pump relays, and pump, RPM Sensor, and your normal tune-up items(s plugs, etc..).

Anyway, I have found out how to start my car each and everytime. It may not be the wisest, but until I replaced the part needed, it gets me to work on time, or anywhere else I need to go. What I have to do, is get my trusty jumper tool, a long prybar. While the key is in the running postion (dash lights on), I jump my positive + & negative - leads at the starter together. My brick starts each and everytime.

2nd Problem: I do have the problem, sometimes of my key stays stuck in cranking position, and the car runs with no accesories, after immediately starting. As long as I put the key back in the running pos, this hasn't been a problem. However, somewhere along the line, I learn the ignition switch behind the key module, is the culprit. Thought I read, but can't find how to re-build it.

Somewhere else I read, that if I can start the car, by ignition key bypass, the actual switch could, also be the problem.

Could replacing this ceramic ignition switch resolve both issues?

So, last week I removed under dash cover, and took out the ign. switch, and thought I could rebuild it. That didn't appear to be as easy as I thought. So, I put it back in, thinking (electronically), maybe re-seating it would delete my cranking problem. Nope!!!

BTW: I was able to start after separating switch from key insert itself, and rotating it with screwdriver.

In earlier posts, I thought this was related to cold weather vs. warm changes. This is now, irrellevant. Problem may occur 2 out of 25 working cranks(more or less).

I re-tightend post on starter several months back.

Am I barking up the right tree, or am a climbing an Oak, and should be on a Willow Tree?

Thanks,
Kevin
1990 740 GL Rex 212K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.