The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 no power to injectors 200

I just reviewed the FAQ for 7xx/90 and did not find an answer to my question.

I have a 1986 non turbo 240 wagon with an automatic transmission. I washed the engine awhile back, and afterward started the engine. Then engine started fine, but after running for 5 minutes sputtered and would not restart. I found the main wire harness insulation completely failed.

I replaced the failed wires, but the car still wouldn't start. I then installed a used wire harness.

I have spark to the plugs, and the engine turns over fine. Fuel is not coming out ot the injectors, and the fuel pump is pressurizing. I do not show voltage at the injector connection when turning over the engine.

From reading, I understand that the Bosch ECU is the last thing to go; but is there a way to determine if it has failed?

Also: What voltage should I be sensing at the injector?

Any suggestions are welcome.

Thanks for any help.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.