The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

E-code Headlamp assembly

E-codes don't use any parts from the US headlight assembly.

The e-code headlight uses a trim piece along the top (or some have a single L shaped piece that goes along the top and down the side). This does not transfer from the US spec lights...not even close. It's e-code specific.

The e-code turn signal has a trim piece along the top. This piece DOES swap between e-code and US turn signals, even though the turn signal assemblies are totally different, and the lenses are different too.

The e-codes should have three studs sticking out that use 10mm nuts like the stock headlights. My OEM Volvo/Cibie e-codes still had a plug on the turn signal side, and it was plug 'n play wiring for the marker lights. I had to splice an H4 plug in place of the US spec headlight plug however.

It's an easy swap.
--
WANTED: #572 ECU from LH3.1 M47 '90-'93 240






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.