The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wagon Tailgate Wiring 200 1986

I did the rewire out of the hinges also. I didn't go by the directions but I did mine in a similar fashion. I made a harness using the excisting wires in the tailgate. I did have to put a 1" hole at the top of the tailgate and in the back interior near the headliner and used rubber grommets and some plastic flex wrap where the wires were routed. I made the harness in the tailgate long enough to go all the way up and over into the main body and soldered the wires together behind the headliner. Inside the tailgate, I used some plastic wire clamps with an eye and fastened the harness to the backside of the license plate bracket mounting nuts to hold the harness away from the moving rear wiper. Its not noticable unless you are a diehard purist that doesn't like to modify the original design. It has never failed in over three years. If you do this, be sure to seal the holes in the tailgate hinges with some silicone sealant.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.