The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Questions about the two piece poly torque rod bushings. 200

Hello all.
I bought some poly torque rod bushings from Suspension Restoration. I needed to remove the old bushings completely and then press the two halves in on each side of the rod and then theres a tube that slides through the center where the attaching bolt will go. The bushings will press in easily by hand. These are like some I've seen pictures of that IPD or FCP (not sure) sells.

What keeps the rod from sliding side to side on the tube? The original bushings kept the rod centered, these don't. Does it matter if it wanders. I'm thinkig that even it it moves all the way to one side it won't actually have metal to metal contact because there is a lip at the side of the poly bushings. The lip might get torn up over time though if the side of the bushing makes contact with the mounting tabs.

Also, should I use some type of lube or are poly bushings self lubricating?

Thanks for any advice.
Kyle 245






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.