The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ripping Me Head Off... 120-130 1967

posted by  someone claiming to be shayne on  Wed Dec 21 08:03 CST 2005 [RELATED]

1) Exhaust manifold nuts - I had a heck of a time removing the second nut from the front on the lower "tier". This is located almost directly below the intake for cylinder 2, and behind the alternator. It took me nearly two hours of fotzing to get it off - getting it on will cause me to lose sleep. Any hints?

Phil S taught me years ago, with the carbs and heat-shield taken off the intake manifold, those nuts are a piece of cake with a socket and long extention. And it's really not that much more to remove carbs from manny.


I would replace the manifold gasket, I don't consider it re-useable. If you are careful with the carb-to-manifold gakets, they shoud be okay.

Shayne.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.