The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A Tale of Two Front Disk Rotors 444-544

Hi,

I take it you're converting to disks?

There are two ways of using the 120/P1800 caliper bracket, Either basically as Volvo intended which places the calipers in the same position as on the 1800 or 120, the negative of this is that you'll end up with restricted lock on the steering.

Alternatively you get a competent welder to weld up the holes, and weld an ear onto the bracket, and put the caliper in front of the axle line. To do this you swap the calipers from right to left so the bleed nipple remains at the top.

As for the disk use a complete P1800/120 disk and hub, it bolts straight onto the PV stub axle, the bearings being identical.

If you're going to run a Servo you need 120/P1800 rear brakes, because the Wagner setup is self servoing. The drums are identical.

regards


Pete






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.