The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Check the belts 200 1991

-Check the belt to the compressor and replace with a Volvo belt which fits the compressor pulley best. Auto Zone belts squeal more

-It could need a charge but if it does, it may leak more afterwards. But the pressostat on the right side of the reciever dryer would have shut the compressor off if pressure was below a certain point like 10 pounds.

-If the charge is gone and you open the system, replace o-rings and check the orifice tube. You unscrew the black tube going into the firewall to the evaporator and you will see a little thing that you pull out. It is a filter and if it's full of black gook and metal chips, then your compressor is near the end. Some dude on e-bay will sell you a new one for $125 that he rebuilds in China.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.