The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

front suspension 'pop' only in reverse, cranked 3/4 to one side 200

This is hard to describe in the subject header... However
I have replaced the steering rack, tie rod ends (outer, inner were good on the used rack) ball joints, strut mounts, strut inserts, sway bars and lower sway bar bushings (but not the endlinks) ball joints.
they symptoms are: when I crank the wheel in reverse hard over it will pop really loud. It does not do this if just sitting cranking the wheel hard over both ways, only if moving.
I am guessing that the next step is replacing the rear control arm bushings, but I searched the archieves and found no report of these particular symptoms. I have no clunking going over bumps.
This is driving me nuts after replacing all rear bushings, and the work on the front end... I am telling you nuts!!! Any input or reasurance that the rear control arm bushings are the culprit would be appreciated!
Car in question is a 84 244gl
tia






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.