The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ignition timing advancement 200 1979

hello all,
prob with ignition timing on '79 242. dist was practically welded to block so had to use hammer and punch to turn it. timing was a bit retarded so i advanced it to within 2deg's factory specs but dist would not turn any further. it *looks* (kind of hard to see) as though the locking bolt has run up against the end of the slot its in so it wont go any further. timing is ok for now but im concerned that i may have to advance timing further after i pull the head and have it machined. also thinking of installing a b-cam and worried that i may not be able to tweak timing once its on if i hit the wall of the slot again. any suggestions? im thinking that the head job might let me retard the timing so the bolt is nearer to the middle of the slot???? is their a way to set the distributor so that the lock bolt is near the middle of the slot? do you have to advance timing after installing a b-cam (i think ive got the t-cam in there)?
thanks for help
s






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.