The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Volvo 240 no-start 200

240 GL, '83, 4 cylinder 2316 cc. Wont start,good fuel press (about 90 psi during cranking)at fuel filter outlet, good spark but no fuel delivery at injectors unless I lifted up the air-flow sensor plate manually then injectors give good spray. Had vacuum gauge hooked up to intake manifold, reads 3" Hg during cranking. Blanked off auxillary air valve,EGR, fully screw in idle adjust screw & sealed injectors' cavities with eng oil to re-check vacuum, no improvement either. Compression tested all cylinders, all average 140 psi.Checked all hoses connected to intake manifold, good.

What cause air leak problem?Is this why it's not operating fuel distributor to fuel injectors?

Luckby






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.