The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil leaks 1987 740 turbo 700


I have just completed a rebuilt head on a 740 turbo, car new to me, with new gaskets, o-rings, etc. I have oil dripping from the engine and it appears to be coming from two areas.

1. From the right rear corner of the engine in the area of the cam cover. I have replaced both o-rings and the internal seal in the cam mounted distributer and it does not appear to be leaking. Is the cam cover gasket in the corner a problem to seal?

2. From the base of the turbo, in the area where the return pipe exits from the base. The base area is wet with oil and it is hard to see if it is coming from the flange for the reurn pipe or not. Is the base area a place that would normally be wet if the internal seals of the turbo are leaking? Or is most likely from the flange of the reurn pipe? It's hard to tell just by observation.

Thanks for any helpful suggestions.

Gary






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.