The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need advice please! 1978 244

posted by  Michae1 on  Thu Jan 26 18:17 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 28 08:41 CST 2010
[RELATED]

A '78 B21 uses a valve cover that has a vent, and the flame trap is located in that hose coming off the valve cover. The B23 has a breather box on the side of the block (near the starter, under the intake manifold) and the flame trap is down there. So you've got some plumbing to sort out with respect to the PCV system.

A B23F used LH-jet fuel injection, which had fuel injectors in the intake manifold. '78 has K-jet with injectors in the head. You need a k-jet head, or else you have to drill and tap holes to mount the k-jet injectors in the currently blank bosses on the B23F head.

Yes, the block has the same bolt pattern for the bell housing. No problems there.
--
forums.turbobricks.com






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.