The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Strut stuff S90-V90

Hi Poolman,

The struts don't need to be removed to replace the front wheel bearings.

There is a strut bearing at the top of the strut. I recommend replacing it if your car has more than 100K miles on it.

When you say 'upgrade' the spring. Do you mean replace with a new 'stock' spring or find a stiffer unit? The front coils on our 95 sag quite a bit compared to our 98 as well. I wished I had noticed it before I replaced the struts..... I would have replaced the springs as well.

Replacing the struts is not difficult at all, just use a VERY good spring compressor. When I replaced the struts on the 95 at about 120K I also replaced the strut bearings and the seats as well for the helluvit. I did not R & R the wheel bearings at the time, they felt tight.

DEWFPO
--
1998 S90 071,245 and 1995 964 154,100






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.