The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tips and wrench sizes on rear brake hose 900 1993

I have completed the replacement of rear rotors, pads and left caliper on my wife's '93 940 wagon. To replace the caliper I did not loosen the end of the flex hose that attaches to the hard line since it was pretty crusty and I was afraid to break something. Instead I unscrewed the hose at the caliper only and then screwed on the new caliper onto the hose, which resulted in a slight twist in the hose. I tried several different threadings and found only two positions. I picked the one with the least amount of twist, of course, but am wondering if that's good enough. If my paranoid mind doesn't let me sleep at night because of this, what is a good safe and realtively painless way of loosening the brake hose at the far end of the caliper?

Thanks.
--
Vladimir. '98 S70 base, 5-speed manual - his, '93 945 (approaching 200K miles and rolling on...) - hers






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.