The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Injector Problems 700

RF,

The 740 turbos use a low impedence injector and as I recall 2.8 ohms is correct. It sounds like you have (a) injector seal(s) leak(s). Not hard or expensive to fix. There are seal kits for a few bucks and it requires pulling the fuel rail and replacing the o ring seals. It could be the bolts holding the fuel rail in place may be loose and that could result in the injectors seals not be seated. Pushing the rail down into place and tightening the bolts may resolve the problem. Check the archieves and 700/900 FAQ for more details. Injector seal leaks can cause a lean condition that will produce a rough idle. and miss fires. Spray a little throttle body cleaner around the base of the injectors as the car is idling ... if the seals are leaking the carb/TB cleaner will cause the engine speed to increase or the engine to stumble briefly. A properly running 740 230FT engine is significantly more powerful than the N/A B230F in the 240. Hope this helps.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.