The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

code 311 and no hot restart 700 1990

posted by  Sumerduckman on  Thu Apr 20 00:55 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 21 11:31 CST 2007
[RELATED]

If you have a Regina equipped car (???), then the Volvo green book gives the following check for code 311.


"Remove panel under instrument panel on driver side. Disconnect cable ( VO-W) from speedometer ( single spade wire plug, on the far right side ,driver side,on speedo bump out). Connect ohm meter between cable and #34 connection on control unit (ECU) connector. Reading should be 0 ohm.
If fault code series 311 has flashed and resistance is 0 ohm, the speedometer signal is missing."
--
Gary Gilliam Sumerduck VA, '94 940 Regina , '86 240






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.