The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Adding Cruise Control to 1992 740 Turbo Wagon 700 1992

I have purchased a used cruise control kit to add cruise control to my recently purchased 1992 740 Turbo Wagon.
A set of Volvo directions were supplied. They must not be
for a 1992 though. The directions specify to add the vacuum pump along the
inside fender directly below the brake master cylinder. My car has
ABS brake lines that run through this area, making it impossible to locate this
pump. Up on top, in front of the top of the strut, there is a empty bracket
that looks like a likely spot to mount this part. The holes on this bracket do not line with anything I have for parts.
The connector is in this area also.
Does anyone have this type of setup on there car? Is this
where this pump mounts? If so, what is the Part number marked on this
pump on your car? Any other hints/suggestions on this would be appreciated.
I have reviewed the 700 FAQ and no mention of my ABS line problem.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.