The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Seat Belt Swap 200

The driver's seatbelt on my '83 245 was getting to be difficult to use (automatic lock mechanism got very touchy) so I pulled a pair of the later style front belts and anchors from an '88.

I have the belts and anchors installed, but the center console in the '88 at the pick'n'pull was already gone.

Is the newer center console a different piece or is there a coin tray that just drops into the slot vacated by the old style belt latches?
Looking at what I have, it seems that removing the old belt latches would remove all support for the console - is there a bracket that fits in there once the latch assembly is out?
How have others solved the wiring (old connector uses two slots of square four slot blade connector while new connector is a flat 3 bullet connector)? I can look in Bently for diagrams and splice together something that works, but maybe someone has a more elegant solution...

Thanks,
Joe
'83 245 DL 220K mi






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.