The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Calaytic Converter Flange Bolts - Header Pipe Replacement 200 1993

Hello All,

Unfortunately, I must replace my front header pipe and after inspection, it looks like my cat is still good.

However, the studs for mounting the front pipe to the cat appear to be fixed in the cat flange, and likely part of the original assembly. Replacement of the front header pipe will probably require cutting the mounting nuts off with my dremel tool. By the looks of things, I probably will have to cut the studs off too. If so will I be able to drill out the remainder of the stud on the cat flange or are these hardened steel.

I don't have a torch, just my handy dremel tool with small cutoff wheels. Any tips on this before I get in over my head would be welcome. I've been spraying the nuts on the exhaust manifold and cat with PB blaster for a few days now. I've not done this job before, so I'm trembling a bit.

Marty
--
93 244 - 120K, 93 244 - 196K, 93 245 - 120K (In Ca now) 99 V-70 - 96K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.