The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

2-1-4 error code 200 1989

posted by  woofpack4 on  Mon May 8 20:06 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 1 12:32 CST 2011
[RELATED]

on my way to work this morning my brick shut down on me, took a few cranks and a backfire to finally start it up so I could limp home. Idle's been a tad rough, she studders if I tap the accelarator, sometimes even stalls......

thinking it might be a vacuum leak I tightened the intake manifold bolts (which were a bit too loose) and that made the idle a bit smoother. It doesn't stall if I tap the gas but it still knocks a bit.

I did a quick check of the EZ diagnostics and the code 2-1-4 came up; according to the Bentley manual this is "speed sensor signal bad or no signal," is this the speed sensor on the flywheel? Last time I forgot to plug the wire from the sensor to the harness (after dropping in a replacement engine), she wouldn't start. Am I getting the codes wrong?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.